Welcome to Shenzhen world work (SEEKOO) Technology Co., Ltd. official website 中文| Sitemap| Collection|Contact us

Shenzhen high speed machine manufacturer

400-6936-100

Recommended

Contact

National Free Sales Hotline400-6936-100

深圳市光明区公明街道上村社区元山工业区B区32栋

Contacts
全国热线 400-6936-100

Telephone
0755-29090226

How to identify the high light machine tool is good or bad

From:本站Click rate:2138Publication time:2017-07-11SmallSecondaryBig

A device used to cut metal materials, and metal hardness are generally relatively large, the cutting tool requirements are relatively large, but in the procurement of high light machine tool, can not be on the spot test knife, only to buy back after use Know the quality of the tool, then we should from what aspects to identify its good or bad? The following by the World technical staff to tell you:
High light machine
First: understand the number of tool material particles. The high number of materials is a good tool for the premise.
The same time as the above-
Second: the tool connection at the thinner the better. The thinner the tool, the bigger the rake angle is, the sharper the tool is.
The same time as the above-
Third: observe the smoothness of the tool nose. The tool nose is smooth and the friction of the tool is small during processing, which can greatly extend the service life of the tool. Also on the other hand, the quality of the tool grinding is good.
The same time as the above-
Fourth: observe the cutting edge of the tool. To select the cutting edge of the tool, although the wide edge can increase the strength of the tool, but once the blade slightly wear, the blade will participate in cutting, resulting in sharp decline in the life of high-ray machine tool. Carving industry requires cutting force is small, sharp tool features, choose narrow blade is very necessary.
The same time as the above-
The above is to share with you today, the high-light machine with high strength and smooth movement, suitable for high-speed processing, and motion-driven selection of servo system, with high-precision moving parts, the maximum speed of 15m / min, carved into To a speed of 6m / min.
keywords: